WeCanX is the smartest and most powerful CAN-based communication system we’ve ever engineered
Providing true system synchronization, greater speed capabilities, expanded peripheral add-ons, and full support of diagnostics, WeCanX is designed for optimal situational awareness programming
Processes over 65,000 virtual inputs
Supports any combination of 99 WeCanX devices, including support for multiple Whelen peripherals of the same type on the same vehicle
All CANport signals are configurable as triggerable events
WeCanX Devices
Now you can customize CenCom Core in ways never before possible in a control system
Lightbars
WeCanX Legacy, Liberty II, Freedom IV and Cenator lightbars now support WeCanX with expanded control of individual lightheads in DUO and TRIO models and in lengths over 60″
Inner Edge FST & RST
Inner Edge FST and RST models now support WeCanX with expanded control of individual lightheads in DUO and TRIO models
External Amplifier
Can be operated independently of other sirens
Tones can be synchronous or asynchronous
Public address
Digital voice messages
Variable intensity tones
4MB internal storage
External Howler Siren
Can be operated independently of other sirens
Howler now plays its own tone rather than sensing and following an existing tone
Tones can be synchronous or asynchronous
4MB internal storage
Low-intensity mode
Remote 8 or 16 Output Expansion Module
4 programmable logic inputs
Cruise mode
Same functionality as existing remote modules
Control Point & Input Expansion Module
16 active high inputs
2 analog inputs
Diagnostic output
Can be selected in WeCad as an option
Traffic Advisor Module
Ground switched for Whelen capability
9 conductor
Uses the current 12 position commercial Mate-N-Lok connector
V2V (Vehicle-to-Vehicle) Sync Module
Synchronize lights and tones on an unlimited number of vehicles within any proximity
10-30 VDC power supply
Has diagnostic indicator
Meets California Title XIII requirements for sound output
California Title XIII compliant tone set-up
Includes a handheld controller or a full-function controller
Short circuit protection
Under/over voltage protection
LED fault indicators for speaker and input voltage diagnostics
Horn-ring transfer relay built-in
Siren “in use” video recorder icon appears on video recording to confirm the siren is in use
Siren disable (Park Kill) control input
Dimensions:
2-1/4″ (57mm) H x 8-5/8″ (219mm) W x 7-1/8″ (180mm) D
Two year warranty
295SSA Features:
Single amplifier
One 100 watt speaker
17 Scan-Lock siren tones
295SDA Features:
Two independent siren amplifiers in one housing
Each amplifier drives one 100 watt speaker
20 Scan-Lock siren tones
Produces asynchronous tones, mimicking two vehicles for high-intensity auditory warning (when used with two speakers)
Any two tones can be programmed to any siren tone switch
Full Function Controller
11 programmable power distribution switches (one three position slide switch and eight momentary switches)
Three 20 amp relay controlled outputs with built-in fuses
Eight 10 amp relay controlled outputs with built-in fuses
Two wire Traffic Advisor control
Programming cannot be activated by a user in the cab
All switches can be programmed to activate any combination of the relay outputs
Any light control switch can be programmed to activate any of the eight momentary switches
Momentary switches can be programmed to be activated as a push-on/push-off, momentary, flashing, timed output, or TA control
Copy siren/switch configuration to another unit with “cloning” feature
Dimensions:
3-1/2″ (89mm) H x 6-7/8″ (175mm) W x 1-1/4″ (32mm) D
Handheld Controller
Handheld light and siren controller with built-in microphone
Includes Radio Repeat and Public Address
Public Address overrides siren function
Hands-free operation
12 programmable push-buttons
Buttons feature LED backlighting for nighttime viewing
Includes press on labels for customization
Nine 10 amp relay controlled outputs with built-in fuses
Windows based programming software for custom configuration
6′ coiled cord microphone cable
20′ interconnect cable
Dimensions:
5-5/16″ (135mm) H x 2-1/4″ (57mm) W x 1-1/8″ (28mm) D
Models
295SSA1 – Single tone siren with full function control head
295SSA2 – Single tone siren with handheld control head
295SDA1 – Dual tone siren, for two 100 watt speakers, with full function control head
295SDA2 – Dual tone siren, for two 100 watt speakers, with handheld control head
Control your warning lights, siren and Traffic Advisor functions from a single keypad
Many models to choose from for compatibility with Traffic Advisors
CCSRN
Operates Whelen 2-wire Traffic Advisors that do not require external controls
CCSRNT
Operates Traffic Advisors that do require external controls
Outputs
Solid-state outputs: one 40-Amp, two 20-Amp, four 10-Amp, and four 250-milliAmp
Relay output: one 10-Amp Dry Contact Relay
Lightbar
1 Phoenix style connector for a WeCan Series lightbar
Integrated Traffic Advisor connection on CCRSNT Series
Four positive or ground activated inputs, including a horn ring input
NEW models include input expansion module for additional 8 positive or negative inputs (12 total)
Easy to configure using the included CenCom Sapphire Windows application
Configured programs may be extracted, modified and stored for ease of service and reuse
A USB port on the Amplifier Control Module provides easy access for programming
The control head need not be connected for programming
Each button is individually customizable for numerous button types (Press on/Press off, momentary, etc.)
Control head backlighting can be easily turned on or off for high visibility on patrol or blacked out for discrete night operations
Brightly backlit push-buttons include standard function labels to choose from
Rugged, aluminum-housed Amplifier Control Module is field-serviceable with easy access to fuses and connections
Operates one or two 100-Watt siren speakers
PA microphone with plug-in connector and 20′ microphone cable are included (except with hand held models)
Includes all pigtails and connectors
Rugged CAT-5 cable connects the control head to the Amplifier Control Module
Five-year warranty
Meets or exceeds all applicable SAE, California Title XIII and NFPA requirements with various Whelen speakers
Control warning lights, siren, and Traffic Advisor functions from a single keypad
Newly designed control head with 21 buttons and slide switch
Newly designed software allows for easy program configuration via USB 2.0
Fully Supports all WeCan Series products
12 positive or negative activated inputs
Supports up to 2 of the following: front WeCan Inner Edge, new rear WeCan Inner Edge, or optional remote 16 output modules
Control Head
Ergonomically designed for situational awareness of the officer, Carbide features a new control head with 21 buttons and a slide switch
Completely configurable by the user
The control head is designed with tick marks, a raised surface, and a recessed center for ease of use, allowing officers to focus on the road
Integrated Load Manager
Carbide reduces the chance of a drained battery by shutting off outputs as vehicle battery voltage declines
Integrated Auto-Off Timer
Keep Carbide functioning even if the ignition is turned off
Situation Based Integration
Carbide features improved Situation Based Integration, a technology first introduced in 1993 with Whelen’s B-Link System
Priorities can now be fully configured and controlled
Carbide controls scene-specific lighting for safety and efficiency using any of the integrated 12 programmable inputs, 18 programmable outputs, and optional expansion modules
Turn lights/buttons on or off when the door opens, vehicle transmission is shifted, brakes are pressed, or the sun goes down
Automatically turn on flood lighting when takedowns are activated
Change warning patterns with siren tones
Activate a burst of light when the air horn is pressed
Light up the rear of the vehicle when brakes are pressed
Activate the alarm feature to create a disorienting visual and audible display to aid in officer safety
UV coated dome
Powder-coated cast aluminum base
100% solid-state
Conformal coated electronics
Full reverse polarity protection
Hard-coated domes minimize environmental damage from sand, sun, salt, and road chemicals
Available in permanent, magnetic, or magnetic/suction mount models
Available in Red, Blue, Amber, and White
Rated for thousands of hours of use
12 VDC
Five year warranty
Models
L31 Models
4 Amp (peak), 1.6 Amp (average)
SAE Class 1 Certified in Amber and Blue
California Title XIII Certified in Amber (L31HA_CA models), Blue and Red
4″ (102mm) H x 7-3/16″ (182mm) Dia.
L32 Models
3 Amp (peak), 0.52 Amp (average)
SAE Class 1 Certified in Amber and Blue
2-5/8″ (67mm) H x 7-3/16″ (182mm) Dia.
NFPA Model
Meets NFPA Zone C Upper requirements (L31HRFN Red)
Permanent Mount Models
Supplied with a 6″ pigtail
28 Scan-Lock flash patterns including 4 simulated rotating patterns
Alternately or simultaneously flash multiple patterns with up to eight Whelen Super-LED beacons
Hi/Low intensity control
Cruise light feature
Magnetic & Magnetic/Suction Mount Models
Supplied with a 10′ cord and cigar plug with built-in On/Off switch with LED “On” indicator
80 lb. magnetic mounting base
75 SignalAlert flashes per minute
SAE Class 1 Certified
Low profile, smooth, self-cleaning polycarbonate dome
Clear or color outer dome
Powder-coated cast aluminum base
100% solid-state electronics
Conformal coated electronics provide moisture and vibration resistance
Hard-coated domes minimize environmental damage from sand, sun, salt, and road chemicals
32 Scan-Lock flash patterns with varying rotating flash rates
Available in permanent, magnetic, or magnetic/suction mount models
Permanent mount models are supplied with six input pigtails
Magnet and magnetic/suction mount models are supplied with a ten foot straight cord and cigar plug with LED indicator On/Off switch and pattern control switch
Synchronizable to other Whelen sync products
Cruise light feature
Available in Amber, Blue, Red, and/or White
Solid and split (front/rear) colors
Optional Photocell for low power
25 amps
12 VDC
12 or 24 VDC versions available
Five year warranty
SAE Class 1 Certified
Medium profile, smooth polycarbonate dome
Cast aluminum powder coated base
Full reverse polarity protection
100% solid-state electronics
Hard-coated domes minimize environmental damage from sand, sun, salt, and road chemicals
Fully encapsulated for moisture, vibration, and corrosion resistance
25 total selectable flash patterns (including steady-burn)
75 SignalAlert flashes per minute
Available in permanent, magnetic, or magnetic/suction mount models
Rated for thousands of hours of use
Virtually no RFI/EMI radiation
12 VDC, for 24 VDC models contact factory
12V – 1.5 Amp (peak), 0.6 Amp (average)
4-3/4″ (121mm) H x 6-7/16″ (164mm) Dia.
Five year warranty
Models
Permanent Mount Models
Combination mounting: 1″ pipe/permanent
Supplied with a 6″ pigtail
Synchronize with up to 8 Whelen beacons
Photocell Hi/Low mode available, contact factory
Hi/Low intensity control
Magnetic & Magnetic/Suction Mount Model
Magnetic and magnetic/suction mount models are supplied with a 10′ cord and cigar plug with built-in On/Off switch with LED “On” indicator and pattern control selection switch
Operating System: Windows 11 Pro, Red Hat Enterprise Linux 9.4
